Trance Audio Custom Shop

For any other custom needs, contact us!

We scour the interwebs for used 48volt Phantom power supplies in order to rebuild and customize them. We upgrade internal components and grounding to make the supplies quieter and better than they were before. Better... stronger... faster. (or something like that) These rugged and convenient portable boxes are a great way to provide reliable power for our Amulet Ultra systems. We also add a pair of standard 1/4” TS output jacks on the back of each box for easy Mono or Stereo output. More details here...

Available for $89 plus shipping

10 foot Right angle 1/4" TRS to XLR cable $30

Y cable - XLR to Dual 1/4" TS cable $20

Y cable - XLR to Dual XLR $25

Available for any Amulet Ultra system that does not have a tone control thumbwheel, we add 2 trimmers accessible on the top of the preamp - one each for Channel 1 and 2 - that allow you to shape your tone with a high-end roll off - $20

Any of our Amulet Multi systems can have their AUX channel input set up for an electret microphone (and the AUX input will then only be useful for a MIC).

Here's info on how our preamps that support electret microphones are set up, so you can get the necessary info from the manufacturer of any mics you're considering using to determine if they are good candidates for our Multi systems:

The AUX mic enabled input is an unbalanced (2 wire, as it’s often referred to)
3.5mm (1/8”) jack. There is a 9 volt bias voltage applied to the tip of this
input jack through a 4.75K ohm resistor. So, the MIC used would need to have a 3.5mm plug attached, and be prepared to work with the provided bias voltage.

There is no charge for this modification, just let us know when placing your order

The Multi True Stereo module gives you the ability to easily combine 3 different pickups, and gives you complete control over the mix and levels of each one. This can give you a much wider and more expressive tone palette to draw from as well as the ability to select different pickup types for a particular venue to combat feedback and other problems that might arise.

Unlike the Multi Stereo systems, the Multi True Stereo presents Channels 1 and 2 (i.e.: the Acoustic Lens pickups) as a stereo pair, so the output of those 2 pickups will be left and right in the stereo field, and the pickup in the AUX channel will be in the center of the stereo field.

In this configuration, thumbwheel A is the volume control for Stereo channels 1/2 only, and thumbwheel B is a volume control for the 3rd pickup in the AUX channel.

With Thumbwheel A turned up and B turned dow, you will hear the pickups in Channel 1 and 2 only; with Thumbwheel A turned down and Thumbwheel B turned up, the Aux channel is now available on its own. Turn both Thumbwheels up, and all 3 pickups are now available to balance as you wish.

The Multi True Stereo system provides an excellent platform for guitarists using one of the many 3 disc piezo pickups. It provides a separate channel for each disc with individual gain controls, and allows them to be placed in an incredible stereo perspective. As a bonus, having separate control of the center disc creates a wider variety of useful tones than were previously available.

Available as a Complete System including a pair of Acoustic Lens transducers for $299, and as an electronics-only Upgrade Package for use with your pickups for $219

See above for info on adding a modification to use an electret MIC (on the AUX channel), as well as adding Tone Controls to this Multi model

The FX is a simple concept: mono output x2! As with a regular Mono system, the FX has 2 Acoustic Lens pickups, each one with its own signal path and the ability to adjust the gain for the overall perfect balance and level. But with the FX, we output that signal twice, each send individually adjustable via its own user-controllable thumbwheel right at your guitar's soundhole.

Why? One way to use it - send one signal to the house, one signal to your monitors. Need to tune/retune between songs? The FX allows you to turn down just the send to the audience, but maintain/adjust your monitors (or a send to a tuner) to make precise tuning easy.

Another way to use the Dual Mono FX is to use one of the output signals as an effects send - drive a reverb, chorus, delay or any other type of signal processing pedal or rack, and use it to dynamically adjust the amount of effect as you play, right from the soundhole.

Yet another application - send each FX output to a different channel on your mixer. You can set each channel for a different EQ, have different effects on each (etc, etc.) and use the thumbwheel controls to instantly and precisely blend between them to provide anything from a subtle thickening or treble boost for solo passages, to a complete and wildly dynamic tonal transformation.

Available as a Complete System including a pair of Acoustic Lens transducers for $269, and as an electronics-only Upgrade Package for use with your pickups for $184

See above for info on adding Tone Controls to this Ultra model

COMING SOON!

  • © 2024 Trance Audio Inc ®

  • All Rights Reserved